Collective Racing > : : T e c h A r e a : : > Tech Area and Track Times > All Motor (Moderators: 2point6, Machine Kandy) > Ctr intake cam
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Ctr intake cam  (Read 145 times)
0 Members and 1 Guest are viewing this topic.
crash lander
Collective Board Whore
*****
Offline Offline

Posts: 308



View Profile
« on: July 31, 2008, 08:47:38 PM »
I was trying to get some info on the ctr cam. Looking for what kind of gains i would be looking at in a Gsr with some cam gears. Any info helps. If you have had this setup please chime in.
Logged
//img98.imageshack.us/img98/6182/1197517964050rp0.jpg
2point6
Administrator
Collective Board Whore
*****
Offline Offline

Posts: 1305



View Profile
« Reply #1 on: August 06, 2008, 01:52:46 PM »
This cam works great in the GSR.
Logged
AllMotorC1
Collective Board Whore
*****
Offline Offline

Posts: 227



View Profile
« Reply #2 on: August 06, 2008, 06:45:46 PM »
I dont have a CTR but i do have an ITR intake cam and this cam dropped my 1/4 mile time from a 13.78 to 13.24 with more to go. Trap speeds went from 98mph up to 103mph in the 1/4. I am still running the gsr exhaust cam.
Logged
91 CRX 12.653 @106  1.6  60 ft
The little LS-Vtec that could!
crash lander
Collective Board Whore
*****
Offline Offline

Posts: 308



View Profile
« Reply #3 on: August 10, 2008, 09:46:27 PM »
From what I have read the CTR and the 00-01 Itr intake cams are the same. The thing is... I am looking for Hp in the 190-200 Hp all motor range and I am wondering if this cam will help on the way to where I need to go. I read on Honda Tunings web site in the Tech section under "Killer B" that it is only giving 6-7 hp. I think I am going to need a set of cams ie: crower stage 1, Skunk tuner stage 1 or the blox A's.
Logged
//img98.imageshack.us/img98/6182/1197517964050rp0.jpg
AllMotorC1
Collective Board Whore
*****
Offline Offline

Posts: 227



View Profile
« Reply #4 on: August 11, 2008, 09:52:52 PM »
That hp range is not something that is impossible to do. However to accomplish that goal youwill need a good set of cams skunk 2 pro 1 are not far off from an ITR cam. Anything biiger than a pro 1 and you will need to springs and retainers.
Once you get the cams the "Tune" is going to be everything. I have yet to tune my car. once scott pays for it ill be good to go though.... lmao
Logged
91 CRX 12.653 @106  1.6  60 ft
The little LS-Vtec that could!
crash lander
Collective Board Whore
*****
Offline Offline

Posts: 308



View Profile
« Reply #5 on: August 12, 2008, 09:36:08 PM »
Since he's paying I need a tune as well.
I was only thinking of putting a new set of intake dual springs on the exhaust side to help with the cams and no it wont be more than a stage 1 tuner cam.
Logged
//img98.imageshack.us/img98/6182/1197517964050rp0.jpg
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to: